​​​Wholesale & installations cc

Completely automatic pressurizing units provided with horizontal 22l tanks and self priming jet pumps. Installed in houses to provide or increase water pressure. Pressure tank provided with interchangeable rubber bag. Single phase 230V. See technical page.

Peripheral pumps must work with clean water or non-aggressive liquids only, without sand or solids in suspension. Particularly suitable to increase pressure in a pipeline system. See technical page. 230V 25X25MM 0.37KW 230V 25X25MM 0.60KW

Portable unit for transfering of diesel. Self priming rotary vane pump with cast iron casing. Consumption 22Amp at 12V, flow rate 38 L/min, suction capacity up to 2m, duty cycle 30minutes. Complete with switches, circuit breaker, 2m cable with clips for connection to battery, 20mmx4m anti-static fuel hose, aluminium hand nozzle and intake filter.

Badu eco touch self priming circulation pump is revolutionising energy consumption, operation costs, water quality and lower CO² emissions in swimming pools and koi ponds. The lower the motor speed, the lower the energy consumption. .75 KW

Self-priming pump with open non-clog impeller, fitted with leaf trap. Parts available: o-ring at code M309010, output connector M309011 and nut M309012. 1.1 KW .75 KW

Piston type pump capable of delivering 22 l/min with max pressure of 40bar. Automatic pressure valve. Pump can run dry without damaging seals or plungers.

The unit is a pre-fabricated filtration system ready to install. It consists of a 3 bag filter and 0.75kw self priming pump, three piece high quality housing and fully integrated DB Box.

Single-impeller centrifugal pumps built to DIN standards, with connection to the motor by means of a support unit. Ideal for pumping clean water and other non-aggressive liquids. Easily and conveniently used for a wide variety of applications. See technical page 400V 50X32MM 3.00KW 400V 50X32MM 7.50KW 400V 50X32MM 5.50KW 400V 50X32MM 4.00KW 400V 65X40MM 4.00KW 400V 65X40MM 7.50KW 400V 65X40MM 5.50KW 400V 65X40MM 11KW 400V 65X50MM 15KW 400V 65X50MM 11KW

Self-priming pump with open non-clog impeller, fitted with leaf trap. 1.1 KW .75 KW

Submersible drainage pumps with plunged back impeller vortex type, which allows free passage of suspended parts. Suitable in civil and industrial water systems, for cesspool drainage with oily or chemical liquids, for dirty waters with solid and particularly fibrous particles and for zootechnical waste waters. 3.0 KW 400 V 4.0 KW 400 V

SQ pumps are the ideal solution for the carriage of waters coming from cleaners, sewer systems, zootechnic farms, slaughter-houses, foundries and for irrigation in agricultural field. Applicable in fishing industry, paper mills and in civil and industrial plants. The pumps adopt open single-blade impeller which allows free passage of suspended parts and high performance. 3.0KW SQ42-3 80MM 4.0KW SQ50-4 80MM 5.5KW SQ65-5,5 100MM

Submersible water pumps in stainless steel. Able to drain infiltrating water, cellars or resevoirs, clean or slightly dirty water and for garden irrigation. 1.0KW 230V 32MM