​​​Wholesale & installations cc

C = Fitting can be used on either copper or Polycop pipe. 15X15MM

FI = Female BSP thread for galvanized pipe or similar. 1/2X1/2X350MM 1/2X1/2X450MM

C = Fitting can be used on either copper or Polycop pipe. Washing machine type coupling. 15MMX3/4

C = Fitting can be used on either copper or Polycop pipe 15X15MM

C = Fitting can be used on either copper or Polycop pipe. 15X15MM 22X22MM

Sewer and drain fittings are designed for the conveyance of sewerage and are intended for use in buried applications.

Inline tempering valve temp preset to 43°C. Inner diameter changed to 15MM to allow for easy connection.

400kPA Pressure system. Integral expansion relief valve. Includes pressure controle valve, expansion relief valve and stainless steel seat and strainer.

400kPA Pressure system. Geyser valve pack. Includes pressure controle valve, female valve cock and two vacuum breakers.

Flexible fitting to link toilet pan and drainage pipe. Designed for the conveyance of waste water from sanitary fixtures. Advantage of a flexible connection fitting is that it is ideal when workspace is restricted. Can also be adjusted to release water left or right from the toilet pan. 110MM

Cap to block of opening on 110mm underground pipe.

Pressure control valve with adjusting nut that turns clockwise to give better flow of water to taps and showers. Twin pack at code LCV0201A. 400KPA LAT16

Relief valve must be fitted 300mm above geyser. Release air and drip from time to time due to the expansion of water reheating. Twin pack at code LCV0201A. 100KPA LAT11BLUE 400KPA LAT17 RED

Wall mounted valve supplied with flange. Round, easily adjustable handle. 1/2X1/2

Used as shut-off valve at a toilet or any place required. Easily adjustable with mini lever for opening or closing. MXF 15MM

Adaptor used between new PVC and old earthenware pipe.110MM

Supplied with 400kPa pressure valve, 2 vacuum valves and stop. 400 KPA

Relief valve must be fitted 300mm above geyser. Release air and drip from time to time due to the expansion of water reheating. Twin pack at code LCV0101A. 100KPA LAT26

Pressure control valve with adjusting nut that turns clockwise to give a better flow of water to taps and showers. Twin pack at code LCV0101A. 100KPA LAT25

Consists of one pressure control valve and one relief valve. Place the relief valve 300mm above the geyser. Pressure valve alone at code LCV0103A. 100KPA LAT27

Junctions are used when vertical and horizontal lines are joined into one line. Inspection eye fitted to remove blockage. Soil, vent and waste fittings are designed for use above ground, in direct sunlight and for the conveyance of waste water. 110MM

Bends are used to get a 90 degree angle when joining pipes. Soil, vent and waste fittings are designed for use above ground. Use in direct sunlight and for the conveyance of waste water.

Waste junctions are used to combine two individual pipe lines into one line. Soil, vent and waste fittings are designed for use above ground and in direct sunlight as well as for the conveyance of wa110MMste water.

Bends are used to create a 90 degree angle between two pipes. Soil, vent and waste fittings are designed for use above ground, in direct sunlight and for the conveyance of waste water. 110MM

Male adaptors are used when male thread is required on one end. Soil, vent and waste fittings are designed for use above ground, in direct sunlight and for the conveyance of waste water. 50X1-1/2

Sewer and drain fittings are designed for the conveyance of sewerage and are intended for use in buried applications. 110MM

Sewer and drain fittings are designed for the conveyance of sewerage and are intended for use in buried applications. 110MM

Sewer and drain pipes are designed for use underground and for the conveyance of sewerage water from sanitary fixtures. Plain ended pipe and beige in colour. The SABS pipes are made to SABS 1601 100KPA. 110MM 6M

Sewer and drain fittings are designed for the conveyance of sewerage and are intended for use in buried applications. 110MM

Sewer and drain fittings are designed for the conveyance of sewerage and are intended for use in buried applications. 110MM